***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

System Error?

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

lancer_vr
Lancer Learner
Lancer Learner
Posts: 13
Joined: Sat Aug 17, 2013 7:57 pm
Location: perth Wa

System Error?

Postby lancer_vr » Mon Aug 26, 2013 9:02 pm

hi everyone i was wondering if you could help me with advice. my vr cj lancer had an electrical fire in the dash on the passenger side. ive replaced all the plastics wiring ecu etc. Is the wiring Dash loom all the same for es vr and vrx?

I tried to turn on the car it reads system error ??
i have power to the windows, key, sunroof lights dash aircon ect..

it does also say that it needs asc ? the switch isnt working ?

and the car wont turn over :cry:
Owner of Divine BodyWorks
Perth WA

User avatar
shadow-vex
Lancer Evolution
Lancer Evolution
Posts: 873
Joined: Thu Jun 27, 2013 6:29 pm
Location: camden

Postby shadow-vex » Mon Aug 26, 2013 10:12 pm

I think the ez and vr, sx, vx are all the same, not sure if vrx ecu is the same as they are 2.4l and have slight differences
Image
Boost life scrambles the brain

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Mon Aug 26, 2013 10:22 pm

What ecu are you using? All harnesses should be the same. Only difference you should find is if there is keyless entry, as the ecu needs to be programmed for it.
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

lancer_vr
Lancer Learner
Lancer Learner
Posts: 13
Joined: Sat Aug 17, 2013 7:57 pm
Location: perth Wa

Postby lancer_vr » Tue Aug 27, 2013 10:43 am

its got an es dash wiring loom, vr engine wiring loom and vr ecu and key with imobiliser. The ETAS-ECU is the original from the car im guessing because its different to what was replaced, it all has to be reprogrammed to remove the system error because Vins wont match?

i cant get access to the new wiring ETAS-ECU because i purchased the car with all the wiring supplied. sucks :(
Owner of Divine BodyWorks

Perth WA

lancer_vr
Lancer Learner
Lancer Learner
Posts: 13
Joined: Sat Aug 17, 2013 7:57 pm
Location: perth Wa

Postby lancer_vr » Tue Aug 27, 2013 10:55 am

the ecu was changed and engine harness also. i know the key is reading because the car lock and unlocks and lets me try to crank it over
Owner of Divine BodyWorks

Perth WA

Mohib
Lancer Learner
Lancer Learner
Posts: 1
Joined: Mon Sep 18, 2017 5:29 pm

Re: System Error?

Postby Mohib » Mon Sep 18, 2017 5:54 pm

:hallo:
I faced same problem... Can anybody hook me up... My fuse box was fully damaged which one is in the dash on the passenger side... Then I buy the same Fuse Box and install it... Now my Headlights Doors and signals all working perfectly... but Key is not working... and when i use Manual key and I tried to start my car then i see it says """System Error""" and no responds from engine... and I also see key is not working... I am in a big Problem... is that is Software issue..?? I hope everyone help me...

My Lancer Model is """Mitsubishi Lancer EX 2010 Elegance Package"""
Image
Image
Image
Image


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 7 guests