***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Removing Aftermarket Alarm

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Wed Feb 27, 2013 7:17 pm

Ffs, i disconnect the battery and disconnect all the harnesses from the main control unit, siren still screwing up
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
The X
INACTIVE Member Account
Posts: 6769
Joined: Mon Aug 31, 2009 10:41 am
Location: Pyrmonia! Inner Sydney.
Contact:

Postby The X » Wed Feb 27, 2013 7:28 pm

Do you have a valet switch for the alarm... ? Do you know where it's located? I guess the process will be different on the model - check your manual. This was from the 460 Max manual... looked like the same remote you had. *shrug*

Try this

➢ Disarming without a transmitter
This feature allows you to disarm the security system
without the
remote transmitter
should it be lost, damaged,
or disabled. In order
to disarm
the system without
a remote transmitter, you must have the
vehicle’s
ignition
key and know where the Valet switch is located.
Be sure to check with the installer for the location and the number of
presses of the Valet switch required to disarm the system.
To disarm the security system,
turn the ignition to the ON position.
Press the Valet switch
the preset number of times
(one to five times) within 15
seconds.
After 5 seconds, the system
will now disarm. If the system does
not disarm, you may have waited too long; turn the ignition off
and on and try again.
Location of Valet switch_________________________________
Number of Presses______________________________________
Important! The unit can be programmed to respond to one to five
presses of the Valet switch for the disarm function. Be sure to check
with the installer for the desired programming.
"the quieter you become, the more you are able to hear"
More pix @ http://clubcj.net/viewtopic.php?t=8779
ImageImage

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Wed Feb 27, 2013 7:35 pm

I know exactly where the valet switch is but they never provided me with the amount of times to press the button and for how long.

I littereally picked up the keys to the car they said "use this to unlock and lock the car now" and thats it.

I disconnected the battery, disconnected the harnesses from the main unit and the alarm was still going off. I decided to disaemble the siren and smash it a few times against my hand and it seemed to have shut it up for the interim. I think maybe water or something has gotten into it and its shorting the circuit.

Does the actual siren speaker have the backup battery in it or is it in the alarm main unit?

Thanks for your help btw pete, sorry if i seem frustrated, this alarm has been nothing but trouble!!
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Wed Feb 27, 2013 8:34 pm

Sounds like the back up battery in the Soren is dying. It's in there to make the siren go off if someone cuts power to it.

Loss of power = siren goes off.
Battery going flat does same thing
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 19 guests