***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

N/A Rear Bumper Extensions

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Patch
Lancer Learner
Lancer Learner
Posts: 18
Joined: Fri Oct 04, 2013 2:10 am
Location: Perth, Australia

N/A Rear Bumper Extensions

Postby Patch » Tue Aug 07, 2018 10:54 am

Came across these if anyone is after some rear lip extensions. They are universal but they're a pretty good fit for the N/A rear bar (and cheap!). Not compatible with factory rear mudflaps.

https://www.aliexpress.com/item/2pcs-Un ... 4c4d7FluXB

You'll need the 52cm length option in Black or "Carbon Fibre" (use the 'colour' selection). Your colour choice might not matter though, I ordered black and got CF :?

This is with them mounted as far out as they'll go. There is a gap toward the back where the flat mounting surface ends.

Image

Image

Image

Image

Image

I mounted mine so they didn't stick out as far. No gap at the back.

Image

Image

Image

Image

The extensions come with self tapping screws, but I used two screws with captive spring nuts/clip nuts, and two push clips per side that I had laying around. Heaps of room under the rear bar to mark out and drill. You can use the existing mudflap mounting hole, will need to drill 3 other holes each side.

Image

Image

Image

User avatar
ReeceCozaa
Lancer Legend
Lancer Legend
Posts: 1106
Joined: Thu Mar 16, 2017 8:01 pm
Location: Sydney

Re: N/A Rear Bumper Extensions

Postby ReeceCozaa » Tue Aug 07, 2018 4:54 pm

Not bad! Looks real nice bro, a unique add on for a lancer too!
We are all in it for the fun!

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: N/A Rear Bumper Extensions

Postby Lancer1993 » Tue Aug 07, 2018 10:00 pm

It is different, not my style but different.
Image
My rides CJ VRX - CC coupe

User avatar
ReeceCozaa
Lancer Legend
Lancer Legend
Posts: 1106
Joined: Thu Mar 16, 2017 8:01 pm
Location: Sydney

Re: N/A Rear Bumper Extensions

Postby ReeceCozaa » Wed Aug 08, 2018 3:10 pm

Kinda reminds me of the OEM wrx ones
We are all in it for the fun!

User avatar
Patch
Lancer Learner
Lancer Learner
Posts: 18
Joined: Fri Oct 04, 2013 2:10 am
Location: Perth, Australia

Re: N/A Rear Bumper Extensions

Postby Patch » Sun Nov 11, 2018 2:59 pm

Cracked out the spray gun and gave these a paint over the weekend. Bit less attention seeking than the CF print!

Rubbed them back with 600 grit paper until they were dull
Wiped clean with wax & grease remover
Applied a coat of flexible plastic primer
Applied a few coats of colour matched acrylic
Applied a few coats of acrylic clear

Image

Image

Image

Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 46 guests