***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Scorpion Lip, will i scrape?

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Scorpion Lip, will i scrape?

Postby Ronan.Butler11 » Sun Oct 29, 2017 8:01 pm

Hey guys, saw dis
http://www.ebay.com.au/itm/2008-TO-2015 ... SwFNZW1FIC

really like it, plan on getting it. but practicality over looks is how i want to go

as is, i scrape on my driveway unless on an angle already, its a small decline before the start of my driveway so that adds a bit more risk (Stock suspension) yet i want to lower it. which obviously means more angle to avoid scraping

if i add this lip, how bad do you think it will be? i would like to stay above the 100mm to stay legal. and also, to protect this lip a little i was planning on putting like a very small version of a rhino lip on, just to take the edge off any unplanned impacts

Anyone else got this? do ya scrape? if so what on and how bad
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Scorpion Lip, will i scrape?

Postby bumblebee » Sun Oct 29, 2017 8:56 pm

If you scrape now like you said when you add this its only going to get worse

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Re: Scorpion Lip, will i scrape?

Postby Mystique » Sun Oct 29, 2017 9:43 pm

I don't have a lip on my Ralliart bar and I still sometimes scrape on some driveways, even in my daily (the LX) I scrape on some things on driveways. Unfortunately it's not something that can be prevented I don't think
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Scorpion Lip, will i scrape?

Postby Ronan.Butler11 » Sun Oct 29, 2017 9:48 pm

Mystique wrote:I don't have a lip on my Ralliart bar and I still sometimes scrape on some driveways, even in my daily (the LX) I scrape on some things on driveways. Unfortunately it's not something that can be prevented I don't think


true, i just know from watching people that there can be a fine line between scraping and taking your bumper/splitter/lip to peices. curous what others have done and how i can relate
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Re: Scorpion Lip, will i scrape?

Postby Mystique » Sun Oct 29, 2017 11:23 pm

Only thing you can do is be careful and avoid crappy driveways where possible as well as avoid the crappy parking bollard thingy's that scrape underneath, my friends VRX pods were super scratched when he checked them one day to see what sort of damage had been done to them haha..
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
Quismiff
Lancer Legend
Lancer Legend
Posts: 1015
Joined: Wed Apr 12, 2017 8:37 pm
Location: South East Queensland
Contact:

Re: Scorpion Lip, will i scrape?

Postby Quismiff » Mon Oct 30, 2017 8:52 am

Mystique wrote:Only thing you can do is be careful and avoid crappy driveways where possible as well as avoid the crappy parking bollard thingy's that scrape underneath, my friends VRX pods were super scratched when he checked them one day to see what sort of damage had been done to them haha..


The pods on my VR-X are pretty scratched up, not too sure who's fault as I only checked them after scraping once, so could have been me or the previous owner, and my car is standard, luckily living in a relatively new and flat area of Melbourne the driveways and streets have flatter entry angles, you don't need a hilux with a 3" lift kit to avoid scrapes :mrgreen:
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
ReeceCozaa
Lancer Legend
Lancer Legend
Posts: 1106
Joined: Thu Mar 16, 2017 8:01 pm
Location: Sydney

Re: Scorpion Lip, will i scrape?

Postby ReeceCozaa » Mon Oct 30, 2017 12:14 pm

If it’s cheap material and you scrape already there could be a very possible chance that you would most defs chip and scrape but possible even crack!
We are all in it for the fun!

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Re: Scorpion Lip, will i scrape?

Postby aspir3 » Mon Oct 30, 2017 12:50 pm

If you scrape now you are definitely going to scrape mpre with that lip.

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Scorpion Lip, will i scrape?

Postby lancerdarryl » Mon Oct 30, 2017 3:03 pm

Wouldn't worry about the scraping too much......first driveway you go in to will tear it straight off.Seriously though,lips are a pain they do look great but they do get caught up on a lot off things.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Scorpion Lip, will i scrape?

Postby bumblebee » Mon Oct 30, 2017 5:34 pm

I suppose you could look into rasing the lancer by about 3 inches and then shove the lip on and you would be right as rain
Infact if you could get an extra 3 inches out of it you might go close to be able.to shoehorn 20 inch tyres on the rear.
Lol

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Scorpion Lip, will i scrape?

Postby Ronan.Butler11 » Mon Oct 30, 2017 7:19 pm

bumblebee wrote:I suppose you could look into rasing the lancer by about 3 inches and then shove the lip on and you would be right as rain
Infact if you could get an extra 3 inches out of it you might go close to be able.to shoehorn 20 inch tyres on the rear.
Lol


haha you've heard of a Stancer, get ready for a... lifter i guess?
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Scorpion Lip, will i scrape?

Postby Ronan.Butler11 » Mon Oct 30, 2017 7:20 pm

aspir3 wrote:If you scrape now you are definitely going to scrape mpre with that lip.


yeah what im worried about, especially if i lower it anyway. was hoping to put a sort of 'Rhino lip" to protect it but i think it might do more bad than good

plus i found a protectant lip with a blue outline i can put over just a centre lip if i wanted, BEST DAY EVA
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Scorpion Lip, will i scrape?

Postby Lancer1993 » Mon Oct 30, 2017 8:28 pm

My VRX is on stock suspension and already there are a couple of places I have to be careful and go slow, drop the height 1" and add this and I'd not be going a lot of places. But at least its not as bad as those who have trouble going to a fast food drive through without scraping the speed bumps!

Good thing I can't afford lower springs or this lip!
Image
My rides CJ VRX - CC coupe

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Scorpion Lip, will i scrape?

Postby Ronan.Butler11 » Mon Oct 30, 2017 9:28 pm

Lancer1993 wrote:My VRX is on stock suspension and already there are a couple of places I have to be careful and go slow, drop the height 1" and add this and I'd not be going a lot of places. But at least its not as bad as those who have trouble going to a fast food drive through without scraping the speed bumps!

Good thing I can't afford lower springs or this lip!


yeah my plan is to get all my kiddish mods done to whatever car before i have proper responsibilities like a mortgage and stuff like that. i may not save for more important things as quick, but i would rather the experience hahaha

part of me would love the lip but i dunno now, maybe the centre lip and then a rubber protection lip is the way to go
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 16 guests