***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Are these plug and play????

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Are these plug and play????

Postby luke_1993 » Sun Aug 09, 2015 10:24 pm

Just want to know if these lights are plug and play, no cutting of wires!?

http://www.ebay.com.au/itm/Black-LED-Ta ... 1e69f07b4d

http://www.ebay.com.au/itm/Smoked-Black ... 27b86f8db3

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Sun Aug 09, 2015 10:33 pm

Yes they're plug and play I have them on my car.

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Postby luke_1993 » Sun Aug 09, 2015 10:34 pm

Ohhhhh which ones? can you put a pic up please :)
Image

WadesVRX
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Sun Oct 30, 2011 12:59 pm
Location: Brisbane

Postby WadesVRX » Sun Aug 09, 2015 10:41 pm

The ones you have attached to this form are plug and play I'm planning on getting the same ones very soon. Also makes our CJs look nice!!!!
Flight Instructor

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Sun Aug 09, 2015 10:41 pm

I have a different light design but same manufacturer to what you posted but the wiring is all the same. It just plugs into the original wiring loom. The only thing is with the LEDs because they use a lot less power you need a resistor (which comes included) otherwise the indicators will blink too fast but thats also plug and play.


Image

The lights I got are here:

http://marsperformance.com.au/JDM-Varis ... n-07-15-KS
Last edited by Swerve on Sun Aug 09, 2015 11:03 pm, edited 1 time in total.

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Postby luke_1993 » Sun Aug 09, 2015 10:46 pm

wow that looks so nice man, i was thinking of getting them ones but didn't
want to pay the amount they are.

do you think they'd fit a 2007 vrx because it says it wont on ebay?

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Sun Aug 09, 2015 10:58 pm

Yes they should fit as all ES and VRX 07 - 15 taillights are interchangable. I'd recommend buying it directly off their website too as you can get postage insurance and bulb upgrades.
Last edited by Swerve on Sun Aug 09, 2015 11:01 pm, edited 1 time in total.

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Postby luke_1993 » Sun Aug 09, 2015 11:00 pm

ok cool, thanks for your help mate :D
Image

User avatar
3Mack
Lancer Newbie
Lancer Newbie
Posts: 49
Joined: Mon Dec 15, 2014 9:20 pm
Location: Charleville

Postby 3Mack » Sun Aug 09, 2015 11:00 pm

Odds are you'll be fine. The volt resistors are very easy to hook up as well; just make sure you put them on the outer ones and not the boot ones like I did x.x

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Postby luke_1993 » Sun Aug 09, 2015 11:02 pm

ok i have no idea what you said, that's i want it all to be plug and play lol

User avatar
3Mack
Lancer Newbie
Lancer Newbie
Posts: 49
Joined: Mon Dec 15, 2014 9:20 pm
Location: Charleville

Postby 3Mack » Sun Aug 09, 2015 11:06 pm

It's as plug-and-play as you'll get. Let's just say that.

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Postby luke_1993 » Sun Aug 09, 2015 11:09 pm

aww man now im curious haha so no cutting wires just need to make sure i plug it in the right plug...right?
Image

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Sun Aug 09, 2015 11:10 pm

In simple terms LEDs require a lot less power, so if you have LEDs in your indicators they'll blink a lot faster than usual. A resistor just makes them blink at a normal rate. If memory serves me correctly with these Mars Performance lights the resistor is just a black box and extremely easy to install. If you want I'm happy to pull one of mine out tomorrow and show you the setup.

User avatar
luke_1993
Lancer ES/EX
Lancer ES/EX
Posts: 196
Joined: Wed Jun 03, 2015 3:50 pm
Location: Canberra

Postby luke_1993 » Sun Aug 09, 2015 11:14 pm

im just hoping that when i get the lights it comes with some sort of instruction :)
Image

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Sun Aug 09, 2015 11:45 pm

As far as I remember there were no instructions or I overlooked them its all pretty straight forward.

You'll need to remove this panel. There's two black screw type things you need to undo.

Image

Undo these two screws and you'll have to use a bit of force to pull the taillight out as there's two pins holding it in still. This is for the outer taillights.

Image

The clear thing is plug and play easy enough.

Image

The black oval thing is the resistor and as you can see it needs to be spliced in. I soldered mine in and electric taped over the solder join. You can see which wires you need to splice the resistor into as they are the ones with electric tape.

Image

In th top left corner that black round circle is a grommet and I believe it may come with the lights not 100% sure though. If it doesn't just remove it from your old lights and put it in your new ones. Then push it back into the hole.

Image

This is the other side of the grommet its all plug and play as you can see.

Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 39 guests