***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

OEM Bonnet Guard Blackout

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Mitchell
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Sat May 25, 2013 2:03 am
Location: Sydney

OEM Bonnet Guard Blackout

Postby Mitchell » Sun Jan 05, 2014 7:55 pm

So the OEM bonnet guard is wack. Who the hell wants a clear guard on their bonnet. When I went in for the paint I said I wanted to black out a bonnet Granny shield. The sales assistant laughed and said F' you I have one of those on my WRX.

So I hate paint chips. Another example would be my spats http://clubcj.net/viewtopic.php?t=15533

I wanted bonnet protection, clear vinyl is not bad but I liked the look of one of our sponsors vehicles. I can't find it now, but had his pic of a red lancer as my desktop background for weeks before I gave it a go myself.

I have no idea how he did it, but thought it worth the money.


I ordered a OEM bonnet guard for $60 off ebay then went and bought a can of epoxy enamel (rust guard) from Buzzings. The sales assistant was not convinced it would work, but given I have worked in their paints dept there for +3 years I was fairly confident it would.

I hit the rear side with a standard green scotch bright pad that you probably have for use as a kitchen sink scourer. The perspex is smooth and needs something to adhere to.
I then sprayed the back-side with 4 coats, the first being a very fine layer for adhesion. All coats were done on the back side, NOT THE FRONT.

I tried it out on a spare piece of perspex and through all tests it worked best on the under/back side.

So here is how it looks after two months. On a bonus note I had a stray shopping trolley run into my front end, the guard stopped all the force and required only minor buffing to get the scratches out. If I didn't have it on I would have lost paint work on the bonnet.

Image
Image

Image

This post is now first placed on a google search for "Bonnet blackout" You rock CJclub!!
Everyone please appreciate to medium you are given, the search engine results that this site gives are second to none. This has come from our predecessors hard work. I thank them and you should too.

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Sun Jan 05, 2014 10:22 pm

looks great
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Jan 05, 2014 10:25 pm

:D

User avatar
Mitchell
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Sat May 25, 2013 2:03 am
Location: Sydney

Postby Mitchell » Sun Jan 05, 2014 11:07 pm

SIX wrote:looks great
Yeah surprisingly it didn't turn out half bad. Looks a bit off on the ole' SX with not even pods, but will look mean as once I fit a bar.

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Mon Jan 06, 2014 4:27 am

Nice work
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem

User avatar
Syke
Lancer VR/GT
Lancer VR/GT
Posts: 291
Joined: Mon Jun 11, 2012 10:24 am
Location: Toowoomba, Australia

Postby Syke » Mon Jan 06, 2014 9:24 am

i did my old one in nightshade, works just aswell. looks way better then clear
Syke
One step closer to owning an Evo

Google Is Your Friend! Learn to embrace it...
Check Out My Garage
http://clubcj.net/garage.php?mode=view_vehicle&CID=1054

User avatar
Mitchell
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Sat May 25, 2013 2:03 am
Location: Sydney

Postby Mitchell » Sat Jan 18, 2014 5:42 pm

bunnishiwa wrote:Nice work

Syke wrote:i did my old one in nightshade, works just aswell. looks way better then clear


bunnishiwa Thanks mate.

Syke, Yeah I would love to do it in nightshade, wouldn't mind hitting the rear lights a tad as well, but Buzzings is a where I works so enamels it was. I think it would have looked even better just tinted a few shades.

Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Mon Feb 03, 2014 5:05 pm

would a blacked out full bonnet look silly? I've a blue lancer and a friend just ordered some vinyl which will be left over from his purpose…Any thoughts?

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Mon Feb 03, 2014 6:38 pm

Kevin, Kevin, Kevin - you're asking the wrong person - I'm biased!

Image

Someone on here has a full bonnet blackout in carbon-fibre on a blue car (remember that real carbon-fibre is slightly textured, but is glossy, not matte).

doo eet!!!
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Mon Feb 03, 2014 6:49 pm

Image

Image

Image
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Mon Feb 03, 2014 8:34 pm

Whats yours?

The full black now seeing it looks kinda weird...

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Mon Feb 03, 2014 8:49 pm

The top one - TNT703

You need to get the 3M 'magic' tape - it's a really thin, strong cutting tape that goes under the vinyl and lets you cut to an exact line by pulling it up after the vinyl goes over it.

Kinda hard to describe, but it's on the 3M vinyl site...


I did the roof too, it gives it a bit more 'balance'...
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 25 guests