***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Side license plate mount, legal?

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Neo
Lancer VR/GT
Lancer VR/GT
Posts: 253
Joined: Mon Apr 09, 2012 7:02 pm
Location: Perth, W.A

Side license plate mount, legal?

Postby Neo » Fri May 18, 2012 12:28 am

i was going to use some double sided tape and just put my license plate on the side but im wondering whether its legal or not? :?
thanks :D

User avatar
E-dawg
Lancer Learner
Lancer Learner
Posts: 13
Joined: Mon May 24, 2010 7:03 pm
Location: Adelaide, SA

Postby E-dawg » Fri May 18, 2012 1:18 am

The exact rule would vary by state, but I see plenty of Lancer Evos and supercars going around with side licence plates mounted. So it would be legal, it's just how angled, positioned, visible, etc. :)
Work Hard, Play Hard, Drive Hard.

User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Fri May 18, 2012 8:15 am

I think in QLD it has to viewable from an angle of 45 degrees on either side at a distance of 25m. I asume most other states would probably be similar.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h

User avatar
eshanes
Lancer Newbie
Lancer Newbie
Posts: 98
Joined: Mon Oct 03, 2011 12:09 am
Location: Concord, NSW

Postby eshanes » Mon May 21, 2012 1:50 pm

I believe it's the same requirements in NSW, .
In saying that, I have my number plate cable tied to my grill and I've never come into any strife.

Best off checking with MainRoads or their equivalent just to make sure.

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Mon May 21, 2012 2:32 pm

Needs to be secure. Double sided tape wouldn't be accepted as the plate can easily come off. Zipties or bolts :)
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image

User avatar
MRWOLF
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 304
Joined: Wed Aug 10, 2011 10:58 am
Location: Mount Annan,Australia

Postby MRWOLF » Mon May 21, 2012 4:00 pm

Aspir3 (Troy) down in SA has his Velcroed and from what I read it has never come off...
Whether or not using tape is strong enough or legal I'm not too sure
You can buy the side mount plate from body kingdom in QLD or on eBay however, the measurements for one hole Is bout 2cms off... Just simply drill a new hole and it's all fixed
Tadz0rz and 13EZY have side mounted the number plate have a look at their garage
Mine's quicker then yours!!!

Range Rover Sport 2014-
2013 WRX: 2013-
2009 Lancer: 2010-2013
2003 Astra: 2008-2010

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon May 21, 2012 5:20 pm

If a cop wants to be picky they can argue that the plate is not in the stock position etc.

A side mount plate is illegal due to not being able to see the plate at 45deg like has been said already.

The pitch on the lancer bar means that you have to have a pretty large mount to meet the requirements.

It is one of those things, if you treat people with respect you may get away with it, but it is not legal.

User avatar
AllBlue
Lancer Learner
Lancer Learner
Posts: 8
Joined: Mon Mar 12, 2012 2:07 pm
Location: Townsville, Australia

Postby AllBlue » Mon May 21, 2012 8:29 pm

My plates are on the side and have not been pulled over yet by any police.

if i pass any police they just look and do nothing else.

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Mon May 21, 2012 9:10 pm

And it looks ghey .....

User avatar
brent0013
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Sun Apr 24, 2011 12:21 am
Location: Gladstone, QLD

Postby brent0013 » Mon May 21, 2012 9:14 pm

i was asked by the dealership if i wanted it in the middle or off to the side when i bought mine. cause they didnt have a place to screw it in to the aftermarket bumper

User avatar
13EZY
Lancer Legend
Lancer Legend
Posts: 1063
Joined: Sun Oct 24, 2010 7:50 am
Location: Brisbane, Oz

Postby 13EZY » Mon May 21, 2012 9:16 pm

I got pulled over by the cops and politely asked to increase the angle which I did. no dramas since :)
its perfectly legal as long as the requirements mentioned by Zedd82 are met.
as Lazy eye mentioned the front bar has a fair slope which makes a side mount stand out a fair bit too
"That's page 1, chapter 1 of the petrosexual handbook"
(Lord Clarkson - Series 17 Episode 1)
Image
Ride Of The Month June 2011

User avatar
Joel006
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Fri May 25, 2012 7:33 pm
Location: Brisbane, QLD, Australia

Postby Joel006 » Sat May 26, 2012 10:09 am

Yeah as stated above QLD legislation says:
Veiwable from 45 degrees from center of the plate and veiable from either side of the car. So if you get the proper mount for it which brings the plate flush with the front just a bit offset im going to say that would be legal.

as for taping it to the bumper with a slight bend in it. No i don't believe this would be legal.
Car: 2012 Mitsubishi Lancer Platinum Edition
Colour: White
Mods: (Nothing Really) K&N Air Filter, Dark Black Window Tint, White LED Strip behind Front grill
Upcoming Mods: Evo like Front Bumper

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon May 28, 2012 9:35 pm

And the Alfas if you look closely even though it is side mounted, it is almost straight, and not at an angle...


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 11 guests