***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Plasti Dip Blackout

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Lancer09
Lancer VR/GT
Lancer VR/GT
Posts: 229
Joined: Fri Nov 01, 2013 7:27 am
Location: Sydney

Postby Lancer09 » Sat Feb 08, 2014 2:45 pm

If people want to get plasti dip off easier than peeling then you can spray the area with WD40 and just wipe off ( i did it to my rims) I'm also assuming if you had a hose you could just spray it off after using the WD40.

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Postby Mystique » Sat Feb 08, 2014 3:03 pm

I find wax and grease also works wonders :D
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
Amelia92
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Wed Feb 19, 2014 9:35 pm
Location: Brisbane, Australia

Postby Amelia92 » Sun Feb 23, 2014 4:18 pm

I'd really love to do this with my ES.

I would like to do this myself, but I am worried about how long it would last form and if it is reasonably easy. I'm not one to take this apart and fiddle around, I'm too uncoordinated...

Any helpful hints/tips?
AMELIA - '09 MY10 CJ Lancer ES (Stock)

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Sun Feb 23, 2014 4:41 pm

Hi Amelia - what part of Brisbane are you in?

Personally, I'd recommend getting the front bar blacked out in vinyl, by a professional - it should only cost around $55-$75, which isn't that much more than it would cost if you did it yourself, by the time you you cost in the plasti-dip, masking tape, cleanup products etc.

Wrapture Styling (now Exclusive Wraps) are a sponsor - email them, tell them you're a club member and get a quote...

Much easier!

:-)
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image

User avatar
Amelia92
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Wed Feb 19, 2014 9:35 pm
Location: Brisbane, Australia

Postby Amelia92 » Sun Feb 23, 2014 4:49 pm

Zaphod, thanks! I actually had a squizz at your Lancer just before and noticed you went there... I am considering vinyl if it is cheap enough. Does yours have a good fit/finish?

ps - I am near Underwood. :)
AMELIA - '09 MY10 CJ Lancer ES (Stock)

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Sun Feb 23, 2014 5:01 pm

Sweet! - they're at Coopers Plains, just down from Beaudesert/Granard Rds., so it'll be easy to get to.

If you look closely, I filled in the (six) holes that are there for the number plate (which is currently held on by zip-ties!) - that's the hard part, but if you want to just put the plate back where it is, you won't have to worry about that.

Image


I think the guys at Wrapture/Exclusive can cover the holes for you with extra vinyl underneath the final layer if you want (most people don't do this, plus it will add to the expense!)

If you go ahead with it, take before & after shots and post them on here!

:-)



...and once you've done that, you'll probably want to to the chrome grille surround - that's gonna cost about $10 and half an hour!
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

User avatar
Amelia92
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Wed Feb 19, 2014 9:35 pm
Location: Brisbane, Australia

Postby Amelia92 » Sun Feb 23, 2014 6:14 pm

Zaphod, thanks so much for the help! Definitely what I am looking for! I'd prefer the plate to go back where it was, do you think they could do that? Plus I'm not too crafty with anything fiddle like zip-ties...

I'll definitely take photos! :)
AMELIA - '09 MY10 CJ Lancer ES (Stock)

User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Sun Feb 23, 2014 7:15 pm

Yeah, putting the plates back is just a matter of them not filling the holes in!

They'll refit the plates once they're finished.

May not hurt to contact a couple of vinyl-wrap places and get three quotes!

:-)


I bought this chrome strip:

http://www.ebay.com.au/itm/360696970910 ... 1497.l2649

but you would only need a 3m length - I bought extra 'cos I stuffed up the first time!
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image

User avatar
Amelia92
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Wed Feb 19, 2014 9:35 pm
Location: Brisbane, Australia

Postby Amelia92 » Sun Feb 23, 2014 7:27 pm

I have actually been in contact with Wrapture, who have informed me they have now merged with another Brissy business to make Exclusive Wraps. And I was told the wrap would be $75 + fitting, so I am very keen!!

I have thought of using a similar type of chrome strip, so it's good to get an idea of what to use.

Oh, and your car is on their site too! :D

Thanks btw!! Big help!! :)
AMELIA - '09 MY10 CJ Lancer ES (Stock)

User avatar
TasteTheRuss
Lancer Newbie
Lancer Newbie
Posts: 73
Joined: Sat Feb 01, 2014 6:40 pm
Location: Sydney, Australia

Postby TasteTheRuss » Sat Mar 01, 2014 9:06 am

Did mine a couple days ago, first try was bad as it was my first time with plastidip :P. Finally got it right on the second time lol

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sat Mar 01, 2014 9:09 am

yeah, its not hard, just a couple of rules u have to follow, like pull the mask off straight after the last coat when the edges are still soft
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Postby Mystique » Sat Mar 01, 2014 11:40 am

sleeper wrote:yeah, its not hard, just a couple of rules u have to follow, like pull the mask off straight after the last coat when the edges are still soft



This was my biggest mistake I made after doing my front bumper, I left the masking tape on until the last coat :S :P
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sat Mar 01, 2014 12:07 pm

u do leave it on till the last coat tiff, making sure u concentrate that last coat on the edges and only leave an hour at most between coats, then the last coat softens the earlier ones :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Postby Mystique » Sat Mar 01, 2014 12:54 pm

sleeper wrote:u do leave it on till the last coat tiff, making sure u concentrate that last coat on the edges and only leave an hour at most between coats, then the last coat softens the earlier ones :)



I left it 10 mins between each coat D:
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 10 guests