***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Interior roof trim

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Nov 12, 2009 8:30 am

To do it properly, you need a contact adhesive. Spray onto both surfaces leave for a couple of minutes to get a little tacky and then apply.

You need to do a roof lining properly due to gravity working against it!

Kudos for doing this yourself Graham... I love DIY but I am at the point where I would probably just pay someone to do it :P
User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Thu Nov 12, 2009 11:33 am

Yeah I'll definitely be redoing it, what do you mean by contact adhesive, do you have any brands or anything you'd recommend?

Cheers :)
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Nov 12, 2009 11:35 am

I am just going off what Chris at Concord was using... didnt take notice of the brand....

The idea is that you wait for both lots of glue to become tacky, and then when you place the 2 together the glue bonds quickly....
User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Thu Nov 12, 2009 11:41 am

Ahhh I see, I was putting it on pretty much straight away, didn't know I had to wait! whoops :oops:
Four wheels move the body, two wheels move the soul.

ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster
jhiace
INACTIVE Member Account
Posts: 18
Joined: Mon Sep 28, 2009 9:36 pm
Location: Newcastle

Postby jhiace » Sun Nov 22, 2009 4:58 pm

The contact adhesive talked about comes in many brands but the most common one is Anchorweld. As said above you need to spray both the roof lining board and material and let it be almost dry to touch and then stick it on. ALSO, you should actually be giving two coats of glue to both the board & the material due to it being upside down.

Best way for this glue to work effectively is by using it in a glue gun connected to a compressor.
Post Reply

Return to “Interior”

Who is online

Users browsing this forum: No registered users and 50 guests