Yes for the clamp.The axle length changes as he suspension moves up and down and when you shake them around as you did they will make noises. If you have the car up on stands hold the inner CV in one hand and rock the wheel back and forth with your other hand you should have a small amount of free p...

The axle is supposed to be able to slide in & out that’s quite normal. There appears to be a small amount of grease starting to leak from the small end of the CV boot. Replace the small clamp and clean up the grease and you’ll be fine.

I think you can get those shark fin antennas like BMW use but I think you get reception issues

Go to eBay and search CJ LANCER ABS PUMP he’s still there in Victoria and charging $440.
https://www.ebay.com.au/itm/CJ-LANCER-A ... 56-20017-0

17262
23,904 comments yet we’ve only counted to 17262

Headlining has to partially removed to get to the antenna. Much easier to cut the wrapping

Sounds like the front part of the glass come out of it’s track. I’ve not seen inside a Lancer door but I would imagine the glass is attached to the winder mechanism in two places.There should be some sort of bracket attached to the glass which then fits into the winder they usually have a small whee...

You’ve got it.By the way you can cut through the pipe with a good pair of side cutters-much quicker and easier than a saw.Once you have the unit sitting in a benchvise it will be really easy to remove.

As long as you don’t crush the flare nut into the pipe you should be able to reuse it.Never needed anything other than a scan tool to reset the fault and it's all good.

I’ve done probably 20 C2116 faults all up.ABS pump out and away to be repaired with only 1 failure.

Don’t waste your money if they are copies of crap lights they will be crap also

Preston Motors used to be helpful years ago.

Here’s another one,Holden Cruze this time

Take one out and have a look.At a guess probably M5 countersunk

Rubbers on top of the door are door belts or window belts
https://images.app.goo.gl/wBSbm7itCxfju2W49
I can’t find anything on the 1/4 glass rubbers so they may be a genuine part