They probably don't know how to enable it. It can be done if its available in your etacs

Not all lancers use the climate control sensor. My car doesnt have one (Evo X) Nor did my Ex Wife's VRX.

Outside temp sensor I think. Unless its the sensor for bonnet open/close

http://clubcj.net/viewtopic.php?t=18409&start=30
You also have to have the wiring in the plug at the headlight also. This thread talks about it

I have HID's in my car and the adjustment is auto. I think it applied to some ralliart models. You also need the levelling motors within the headlights.

I think the plug could be the manual head light adjustment switch. http://i.imgur.com/PzRRtdKl.jpg http://i.imgur.com/tPe87C1l.jpg https://www.aliexpress.com/item/1005001703554229.html?spm=a2g0o.ppclist.product.2.33ba4wW74wW7gO&pdp_npi=2%40dis%21AUD%21AU%20%2445.38%21AU%20%2439.14%21%21%21%21%21...

The stock evo x map sensor reads to 3 bar I think

It sounds like the car is throwing codes due to the increased airflow for the map, maf and tps. Its most likely due to being outside the values the ecu has predefined. The two codes are related. I would get the ecu tuned and that should sort the issues. Torque Monitoring explaination and info http:/...

I think you may have to try and replace the clips. I wouldn't glue the panel there due to the airbag. Here are the part numbers, these are available from https://www.amayama.com/en Dealer should stock these too. http://i.imgur.com/GjJuj3Fl.png http://i.imgur.com/AVQP4EMl.png

I have no idea.

The siren is the second horn for the car I believe.

Best off checking if thats all you need to add. I can't answer that. I tried to enable it on my wife's (ex now) vrx and it didnt work. It had most stuff. The only thing i could get it to do was chirp when you lock and unlock the same as the evo.

JaymeF12 wrote:

adamhumphrey wrote:The car should know about door ajar. Do you get an indicator on dash if boot is open?

Yes when I open the boot it shows but should it show with the bonnet?

Once you add the bonnet sensor it will work without being enabled if the wiring is there.

I think you only need to add siren or second horn, shock sensor (I have no idea of location and I dont want to post security related things on here) It will have to be enabled within the ETACs box either through dealer or someone who has abilty to do that. Maybe jump on here on facebook they are rea...

Found this, could only try. I actually read people enable the horn through the etacs for the alarm.
https://www.mitsuguide.com/gimes-71-changing_the_security_alarm_settings.html