Im not sure if they would fail this fast, I thought the upgraded clutches are designed to last a little longer and take more abuse. My SST with stock clutches lasted ages, 125,000kms with one fluid change and a tuned car for a few years. I gave it a hard time and knew nothing about all the little th...

Ok by the sounds of it the sst hasnt had software updated to the new improved shifts, pressures etc. They have just flashed the SST software from an Evo X to get supersport. If it was me I would contact AK racing, Evoscan, or Even Rp Motorsports and see if you can get the sst mod done. AK Racing and...

You might be able to ask the question here.
https://www.facebook.com/groups/1780213088862197
Great source of info. I haven't really felt my clutches slip, even before I rebuilt the sst, I was spending heaps rebuilding my broken motor so I did the sst at the same time.

yes a bad tune can do it, do you know if the sst software has been changed? when was the rebuild done?

No you dont set up like pass thru. Just install the app and off you go. The teach in is from top to bottom on the list.
It has great diagnostics, logging and also can clear codes

https://evoscan.com/product/mitsubishi-subaru-obdii-can-evoscan-software/

You dont need pass through can. I use EvoScan 3.1 it has everything built in to do the teach in now

You can't break anything by doing a teach in. If it errors on anything you know there could be something going on with it. If they have a custom sst firmware on it maybe thats the culprit. Lots of guys are upping the pressures to much and causing issues. I have a build sst and mines running approx 5...

I always thought a teach in was meant to be done after a fluid change. I was having issues after my rebuild of sst, it was coming up service sst. I done a teach in and its been great for a year now

Has it had the sst mod done? Highly recommend it. Mine is running a firmware from RP motorsport. Ak racing do a remote install service. Also it can be purchased from Evoscan. I have a built SST too. Secondly if you have Evoscan and a Tactrix you can log clutch slip within the software. Maybe you cou...

Maybe contact the facebook page MMCodingwriter and ask the question there, the users on there are really switched on with ETACs coding and the software can change the vin code within the odometer. Facebook Link https://www.facebook.com/groups/2273408659369453 Forum Link https://forum.kolyandex.su/in...

I havent ever tried to change odometer values, I dont think it can be done via MMCodiingwriter, I think its coded into the chip within the cluster

I think you need to edit the VIN number within the cluster, Maybe there is also a slight incompatibility with the cluster to the car. But with not actually swapping one Im not sure

Its not as easy as just changing the mirrors, you need to change the mirror switch on the door, the wiring in the car has to be there including the relays. Also the etacs has to be enabled to allow the power fold. Asx/outlander mirrors are different (well my 2020 ASX mirrors are different) to my 201...

Hi just thought I would post this up. I grabbed one of these Lufi XS gauges. It can have custom pid installed to allow us to see sst temp etc. It also has lots of different screens you can customise. I grabbed mine from Ebay, but can be pruchased on lots of sites. https://www.ebay.com.au/itm/1258022...

I was using the mut software with a tactrix open port and the mut3 driver that gets around having to use a mut-3 adaptor.
https://forum.kolyandex.su/viewforum.php?f=14